Wire-wound screen operation

There are a number of ways to clean the fouling inside the screen, and every cleaning method has its limitations. High-pressure eruption cleaning skills for a very good end of the clean homework, the need to rely on the computer care about the number of nozzles and the best scale, also need to wire around the screen speed and the required number of cleaning, these parameters Changing the city has a definite effect on the clean end.

So we say that as long as the operation in accordance with the correct method of wire around the screen, or take care of maintenance methods around the wire screen protection, so as to fundamentally around the silk screen tube operating life.

Wire around the screen damage is usually not a factor, most of the environment are caused by a variety of factors together into the wire around the screen, speeding up the wire around the screen damage.

Non-obstructive: The wire-wound screen is trapezoidal or triangular in cross-section, and the crack around the screen is made up of two acute angles on the two filaments. When the solid passes through the screen, The two ends of the crack point contact, so in theory, the wire around the screen on the screen of the solid particles are trapped in the wire around the screen or through the wire around the screen crack, can not constitute a third obstruction, It is important to reduce the operating resistance of the equipment and to connect the excellent hydraulic distribution characteristics and to enhance the resin backwashing results.